Acroprint Time Q +Plus User Manual download pdf (Page 13)

3.5 Connecting the power cord and securing the access door

Plug in the power cord coming from the wall mount transformer into the

Time Clock terminal. To reattach the access door and secure the unit to

the reversible bracket, screw on the lower front panel of the unit to

tighten the access door.

Power

Cord

Access Door

3.6 Establishing communications between terminal and PC

In most cases the software will automatically locate the PC serial port.

If the software does not locate the serial communications port:

1. From the PC, start the Time and Attendance program.

2. Select the communications icon; then select the correct

communications port and baud rate.

NOTE: The baud rate on the PC must match the baud rate set

on the Time Clock terminal. Default setting on the

terminal is 9600. The baud rate may be changed at the

terminal by using the Supervisor’s badge (see section

12. Manually programming the terminal).

Terminal installation

READ THIS!

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

No comments

Acroprint Time Q +Plus User Manual Page 13