Acroprint ESP180 Time Stamp User Manual download pdf (Page 21)

To continue, press the Accept/Advance Button.

NOTE: If you select a six digit number, then all 6 characters (two

small and four alphanumeric characters) will be used.

Next, SNUM will flash and the starting number will appear.

You can program the starting number by setting one digit at a

time. The number that appears on

the display will have the same

number of digits that you just

selected to be printed. The digits

will flash one by one, right to left.

You can set each digit by holding

down the Edit Button until the

correct digit appears. To continue

to the next digit, press the Accept/

Advance Button.

For example, if you choose to

print 6 digits, then six digits will

appear on the display. When the

first digit flashes, set it by

pressing the Edit Button. Then the

second digit will flash; set it in the same way. Continue like this

for all the digits. Then press the Accept/Advance Button to

continue to the next programming item.

NOTE: When the number advances to one that is greater than the

number of digits you have set to print, the count will automati-

cally reset back to zero. For example, if you have set the clock to

print only three digits, and the number has reached 999, the count

will automatically reset back to 000. It will not continue on to

1000.

Customize printing formats

6 digit display

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Acroprint ESP180 Time Stamp User Manual Page 21