Acroprint ATR240 User Manual

ATR240 User Manual Top LoadingTime Card Recorder

7 Features and Specifications Clock Features Display Language English Operation Mode Stand-alone (No PC Interface) Operational Battery Backup Optio

8 Ribbon Life The ATR242 ribbon (39-0135-000) will typically last 3 months with 50 employees punching 6 times per day (~18,000 punches). Actual ribbo

9 Re-setting Time Recorder to Factory Defaults The "All-Reset" button on the internal control panel resets Time Recorder settings such as da

10 Symptom Possible Problem Solution Punches print on wrong row The End of Day set incorrectly Time Card Form

11 5. Q: Why is my clock printing on the wrong row? A: - Make sure the date is set correctly. - Make sure the “End of Day” time is set corr

12 Replacing the Circuit Board Batteries The ATR240 is equipped with (1) CR2032 3v Lithium Coin Cell battery on the Main board. The

13 Installing the Operational Battery Pack First unplug the clock. The door to the battery pack compartment is located on the bottom edge

14 Appendix Connecting External Signal Devices (Bells & Horns) The connections for an external signal device (bells, horns, buzzers, chimes, etc.

15 Wall Mounting Instructions The ATR240 can be placed on a table or desk and it can also be mounted to a wall. A mounting template is included with

16 For your reference, fill out the information below and keep it in a safe place. Model Number ________________________________________________ Seri

Lithium Battery Caution: The circuit board on this terminal is populated with a lithium battery to protect data or programs stored in the Random Acc

Table of Contents Before You Start!...1 What’s In t

1 Before You Start! What’s In the Box • ATR240 Time Recorder • (2) Clock Cover Keys • 18vDC Switching Power Supply • User Manual • (25) Sample AT

2 Time Recorder Mode Settings Mode Setting Values Default Value 01 Year 2000 – 2099 Year of Mfg 02 Date 1-12 Mo, 1-31 Date 01, 01 03 Time 1-2

3 Clock Overview Top View Front View • Battery Status Indicator: A fully charged Battery will have (5) bars. • DST I

4 Rear View Initial Setup Setting Year 1. Remove top cover a. Locate buttons at the top of the clock labeled P4,

5 Setting Month/Date 6. The mode indicator “02” will be flashing, press P6 to select 7. Press P4 or P5 to select the current month 8. Press P6 to

6 Setting Start and End of DST 27. The mode indicator “08” will be flashing, press P5 to switch to mode “09” 28. The mode indicator “09” will be flash