Acroprint TQ600M (software version 4.x and above) User Manual download pdf

24 Volt Switching Relay

Manufacturer: Honeywell

Mfg. P/N: RA89A1074

Tech Specs

Hydronic

10.2

5.1

61.2

30.6

24 vAC

SPST

2-3/8

5-1/4

4-1/4

Hydronic Heating

Type

Full Load Amps @120V

Full Load Amps @240vAC

Resistive Amps @ 120V

Resistive Amps @ 240V

Locked Rotor Amps @ 120V

Locked Rotor Amps @ 240V

Coil Volts

Switch Action

Depth (in)

Height (in)

Width (in)

Application

TQ600BC & TQ600M External Bell Connection

Please consult your local electrician for installation.

All wiring must comply with all local and national electrical codes,

ordinances, and regulations. Failure to comply could cause serious

electrical shock and damage to equipment that will void the warranty.

It is necessary to install a relay in order to control an External Signal Device such as a

bell, horn, buzzer or strobe. When a signal is activated the internal contacts close

completing the circuit. These internal contacts are dry and supply no voltage. Voltage

applied to these contacts must not exceed 30 volts. The relay activates the external

signal device.

A 24 Volt Switching Relay made by Honeywell (Acroprint p/n 01-0230-000) is available

from Acroprint (see below):

Page 1 of 5

1 2 3 4 5

Summary of Contents

Page 1 - Tech Specs

24 Volt Switching RelayManufacturer: HoneywellMfg. P/N: RA89A1074Tech SpecsHydronic10.25.110661.230.624 vACSPST2-3/85-1/44-1/4Hydronic HeatingTypeFu

Page 2

1) Mount the Relay vertically on a solid wall or partition as near as possible to the TQ600BC (Barcode) or TQ600M (Mag Stripe). Select a locatio

Page 3 - TQ600BC/M

Page 3 of 55) Connect the TQ600BC/M to the power supply then plug the power supply into a power outlet. Program bell schedules (see pg. 5).6)

Page 4 - To Relay

Device Interface:3-PositionExternal BellConnector4-PositonConnector(Not Used)EthernetConnectorPowerConnectorNC COM NO TCP/IP DC12vBack of TQ600BC/M Te

Page 5 - TQ600BC-M Ext. Bell_031412

How to Set a Bell Schedule on the TQ600BC/MNote:Page 5 of 5The Internal Bell of the TQ600BC/M is disabled when the External Bell is Activated.Menu>

Comments to this Manuals

No comments

Acroprint TQ600M (software version 4.x and above) User Manual

Browse online or download User Manual for Relay Acroprint TQ600M (software version 4.x and above). Acroprint TQ600M (software version 4.x and above) User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Relay Acroprint TQ600M (software version 4.x and above)